LD Bar Stacker & Unstacker VDSB3000
on
• Vision System using multiple cameras to ensure accurate auto alignment
• Fully Automatic operation including automatic ring loading and unloading
• High Precision Auto Bar Stacking and Unstacking
• Stacking and Unstacking integrated in a single machine
• Precise unstacking pickup and arrangement in an array
• Precise spacer/bar offset to control and prevent overcoating
• Performs precise ,repeatable and reliable bar pick up and placement
• Large cavity range capability on one tool -150um to 6000um
• Applicable for challenging dimensions including 150um x 16 mm
• High volume /accuracy manufacturing of edge emitting laser diode
• High Yield ,robust tool suitable for mass production
• Virtually zero damage on facets or contacts
• Flexible and Adjustable to match a large range of laser bar geometry
• Easy operation and menu set up
• Low cost of ownership
• Cavity 250～4000μｍ • Length 10～16mm
2. LD Spacer
•Cavity : 220～3970μｍ •Length: 26mm •Material : Si
3. Cycle Time
• Stacking- Less than 12 Sec／1 Cycle（One LD bar and One Spacer）
• Unstacking-Less than 12 Sec／1 Cycle（One LD bar and One Spacer）
4.Vision System –
Multiple Cameras & State of the Art Vision System
• LD Bar Positioning Camera
• LD Bar Alignment Camera
• Spacer Positioning Camera
• Spacer Alignment Camera
• Bar Judgment Camera (To judge /differentiate LD bar or Spacer)
5. Controller
• PLC Control (DOS/V)
• Touch Screen Operation
• Mechanical parameters can be saved as a recipe for each LD bar model
6. Machine Body
• An anti-static translucent cover is installed on the front.
• An anti-static ionizer is attached.
• Clean air flows from a filter unit.
• Color: Opto Standard
7. Utility
•Power Supply AC230V 50/60 Hz 15A
•Vacuum Factory Line
•Air Supply 0.4 MPA 2L/min
8.Size
•2400(W) × 1100(D) × 1800(H) mm
9.Weight •Approx. 1500 Kg
10.Signal Tower •3 Color status signal tower
Laser Diode Bar Stacker & Unstacker VDSB3000
Opto System Fully Automatic VDSB3000 integrates the LD Bar stacking and unstacking process in a single machine .The tool is design to accurately stack LD bars separated by spaces in a jig , by picking them up from the tape mounted on a frame and loading them in a customized jig. The stacked jig is then removed and used to facilitate plasma coating of the bars on both facets. The coated jig is reloaded to the machine for the unstacking process. This is completed by automatically picking up the laser bars and placing them on the frame or Gel -Pak to create an array of coated bars while simultaneously arranging the spacers on a separate frame or discarding the spacers in a box.
Features
• Designed to support R & D and production environments• Vision System using multiple cameras to ensure accurate auto alignment
• Fully Automatic operation including automatic ring loading and unloading
• High Precision Auto Bar Stacking and Unstacking
• Stacking and Unstacking integrated in a single machine
• Precise unstacking pickup and arrangement in an array
• Precise spacer/bar offset to control and prevent overcoating
• Performs precise ,repeatable and reliable bar pick up and placement
• Large cavity range capability on one tool -150um to 6000um
• Applicable for challenging dimensions including 150um x 16 mm
• High volume /accuracy manufacturing of edge emitting laser diode
• High Yield ,robust tool suitable for mass production
• Virtually zero damage on facets or contacts
• Flexible and Adjustable to match a large range of laser bar geometry
• Easy operation and menu set up
• Low cost of ownership
Specification
1. LD Bar • Cavity 250～4000μｍ • Length 10～16mm
2. LD Spacer
•Cavity : 220～3970μｍ •Length: 26mm •Material : Si
3. Cycle Time
• Stacking- Less than 12 Sec／1 Cycle（One LD bar and One Spacer）
• Unstacking-Less than 12 Sec／1 Cycle（One LD bar and One Spacer）
4.Vision System –
Multiple Cameras & State of the Art Vision System
• LD Bar Positioning Camera
• LD Bar Alignment Camera
• Spacer Positioning Camera
• Spacer Alignment Camera
• Bar Judgment Camera (To judge /differentiate LD bar or Spacer)
5. Controller
• PLC Control (DOS/V)
• Touch Screen Operation
• Mechanical parameters can be saved as a recipe for each LD bar model
6. Machine Body
• An anti-static translucent cover is installed on the front.
• An anti-static ionizer is attached.
• Clean air flows from a filter unit.
• Color: Opto Standard
7. Utility
•Power Supply AC230V 50/60 Hz 15A
•Vacuum Factory Line
•Air Supply 0.4 MPA 2L/min
8.Size
•2400(W) × 1100(D) × 1800(H) mm
9.Weight •Approx. 1500 Kg
10.Signal Tower •3 Color status signal tower
Product Inquiry Form
